N-Tron 102PC-SE - Manual (Page 24)

(Revised 2010-11-15) 24
Inactivity: Enables/Disables the inactivity timeout feature. If this is enabled, the telnet/tcp session is terminated if there is no traffic for the configured
timeout value
Default: disable
Inactivity Timeout: Sets the timeout (t seconds) value for the telnet session to be terminated if there is no traffic
Default: 300 seconds
Raw Mode: Enables/Disables the raw mode for Telnet Auto-Dialout and Serial Auto-Dialin features globally
Default: disable
UDP Configuration
Terminate Monitor: Sets "monitor" flag which enables/disables the scanning of terminate sequence by the UDP server
Default: enable
Terminate String: Sets the terminate sequence to be scanned and terminates udp auto-dialout session
Default: +++inet
Inactivity: Enables/disables inactivity timeout feature
Default: disable
Inactivity Timeout: Sets the timeout(t seconds) value for the telnet session to be terminated if there is no traffic
Default: 300 seconds
Autodial Configuration
Autodialin Configuration
o
Autodialin: Enables/Disables the Serial Auto-Dialin feature for the serial port S0. Auto-Dialin feature on this port is enabled only if global Auto-
Dialin is enabled
Default: disable
o
Autodialin Port: Sets the Serial Auto-Dialin port number to which the session should be establised
Default: 23
o
IP Address: Sets the Serial Auto-Dialin IP address
Default: 127.0.0.1
o
Protocol: Sets the protocol to be used by Serial Auto-Dialin feature. Telnet and Udp protocols are supported
Default: telnet
o
Raw Dialin: Enables/Disables raw mode for Serial Auto-Dialin session on the serial port s0. The session will be in Raw mode only if the global
raw mode is enabled
Default: disable
Autodialout Configuration
o
Autodialout: Enables/Disables the Auto-Dialout feature for the serial port S0. Auto-Dialout feature on this port is enabled only if global Auto-
Dialout is enabled
Default: enable
o
Autodiaout Port: Sets the Serial Auto-Dialout IP address
Default: 5000
o
Protocol: Sets the protocol to be used by Auto-Dialout feature. Telnet or/and Udp protocols can be used
Default: telnet
o
Host Interaction Mode: Enables/Disables the host interactive mode for HTTP server. When this mode is enabled, the host/serial device can use
HTTP server
Note: Telnet Auto-Dialout and PPP cannot be enabled when this mode is enabled.
Default: disable
o
Raw Dialout: Enables/Disables raw mode for Auto-Dialout session on the serial port s0. The session will be in Raw mode only if the global raw
mode is enabled
Default: disable
FTP Configuration
Sets/Clears the remote machine, login name, password and account password details which will be used by FTP for automatic authentication
Password is an optional parameter and can be configured along with machine and login names only
Account Password is an optional parameter and can be configured along with machine login name and password only IP Module prompts for login name and
password if these details are NULL
File Name: Sets the filename to be used for ftp file transfer
Filesize: Sets the data size to be sent to the server
Directory: Sets the directory path used by transmit and list commands
Default for all the above: NULL
(continued…)