National Instruments Isolated Analog Output Module SCC-AO10 - Manual (Page 4)

SCC-AO10 Isolated Analog Output Module User Guide 4 ni.com
Figures 1 and 2 show the SCC-AO10 connected to a nonreferenced load
and to a load with a high common-mode voltage.
Figure 1. SCC-AO10 Connected to a Nonreferenced Load
Figure 2. SCC-AO10 Connected to a Load with a High Common-Mode Voltage
Connecting Two SCC-AO10 Modules in Series
You can increase the maximum total output voltage to ±20 V by connecting
two SCC-AO10 modules in series. Plug the two modules into sockets J17
and J18 of the SC-2345/2350, and wire the modules to a load as shown in
Figure 3.
AO GND
SCC-AO10
E/M Series
DAQ Device
AO (X )
1
2
3
I
Load
AO GND
SCC-AO10
E/M Series
DAQ Device
AO (X )
1
2
3
I
Load