National Instruments Isolated Analog Output Module SCC-AO10 - Manual (Page 8)

SCC-AO10 Isolated Analog Output Module User Guide 8 ni.com
Power Requirement
Analog power .........................................180 mW max at full load
172 mW max with no load
+15 V...............................................6 mA max at full load
5.73 mA max with no load
–15 V ...............................................6 mA max at full load
5.73 mA max with no load
Digital power (
+5 V) ..............................1.15 W max at full load
600 mW max with no load
+5 V.................................................230 mA max
120 mA max with no load
Physical
Figure 4. SCC-AO10 Dimensions
Weight ....................................................28 g (1.0 oz)
I/O connectors.........................................One 20-pin right-angle male
connector; one 3-pin screw
terminal
Field-wiring diameter .............................28 to 16 AWG
1.87 cm
(0.74 in.)
7.93 cm
(3.12 in.)
3.55 cm
(1.4 in.)