Nortel Networks 2212 - Manual (Page 42)

42 Chapter 5 Troubleshooting
NN40050-101 NN40050-101
To view the server IP address
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight System Info .
3 Press the Select button (or OK) to select System Info .
4 Press the Up and Down buttons to scroll through the menu and highlight Server IP Addr .
5 Press the Select button (or OK) to select Server IP Addr .
6 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
To view the handset firmware version
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight System Info .
3 Press the Select button (or OK) to select System Info .
4 Press the Up and Down buttons to scroll through the menu and highlight Firmware Version .
5 Press the Select button (or OK) to select Firmware Version .
6 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press
to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
View the current call server IP address
The Current Call Svr option enables the user to view information about the call server in use. You
cannot change the settings.
To view the current call server
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Current Call Svr .
3 Press the Select button (or OK) to select Current Call Svr .