Desktop charger – Nortel Networks 2212 User Manual

Page 54

Advertising
background image

54

Chapter 6 WLAN Handset, headset, batteries, chargers, and accessories

NN40050-101

NN40050-101

To insert the battery pack

For the WLAN Handset 2210 and WLAN Handset 2212:

1

Slide the lower lip of the battery pack into the bottom of the handset cavity.

2

Push the top of the battery pack in place.

For the WLAN Handset 2211:

1

Slide the battery pack straight into the cavity until it snaps into place.

To change the battery pack while in a call

1

Use Call Park to park the current call.

2

Quickly remove the discharged battery pack and replace it with a charged battery pack.

3

Press

to turn the handset back on.

4

Use Call Park to retrieve the parked call.

Desktop Charger

The Nortel WLAN Handset Desktop Charger is designed to fully charge the battery packs in
approximately two hours. The charger operates in a 50° to 85° F (10° to 30° C) environment. Do
not expose the charger to freezing temperatures or direct sunlight.

Desktop chargers are not interchangeable. Use only the charger made for your handset.

Desktop chargers are available for the WLAN Handset 2210 and WLAN Handset 2211 only.

The following figure shows the WLAN Handset 2210 and 2211 Desktop Chargers.

Note: Do not force the battery pack into the handset.

Advertising
This manual is related to the following products: