Nortel Networks 2212 - Manual (Page 57)

Chapter 6 WLAN Handset, headset, batteries, chargers, and accessories 57
WLAN IP Handset 2210/2211/2212 User Guide
Using the Dual Charger
To charge the WLAN Handset Dual Charger
1 Press to terminate any calls. The handset can be off or in standby mode during charging.
2 Place the handset, face forward, into the handset charging bay of the Dual Charger.
The red indicator light turns on.
The indicator light does not come on when the charger slot is empty, when the handset is not
inserted properly, or when the charger has no power.
3 Charge the handset battery.
If the handset is in standby mode, it displays its extension number and Charging…. It is fully
operational and can receive calls. If the handset is off, only Charging… displays and the
handset cannot receive calls.
It is normal for the battery pack to become warm when charging.
4 When the handset is fully charged, Charge Complete displays. Remove the handset from the
charger.
The red indicator light remains on until the handset is removed from the charger.
To charge a battery pack
1 Remove the battery from the handset, as described in “Remove and insert the battery pack” on
page 53 .
2 Insert the battery pack into the battery charging bay of the Dual Charger.
The red indicator light turns on.
The indicator light does not come on when the charger slot is empty, when the handset is not
inserted properly, or when the charger has no power.
If the indicator light starts blinking as soon as the battery pack is inserted, remove the battery
pack and reinsert it into the charger.
If the indicator light continuously blinks during the charging process, the battery pack is
unusable. Properly dispose of the unusable battery pack.
3 Charge the battery pack.
It is normal for the battery pack to become warm when charging.
4 When charging is complete, the indicator light turns off. Remove the battery pack from the
charger.
Quad Charger
The Nortel WLAN Handset Quad Chargers fully charge up to four battery packs in approximately
two hours. Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to
freezing temperatures or direct sunlight.