Nortel Networks 2212 - Manual (Page 43)

Chapter 5 Troubleshooting 43
WLAN IP Handset 2210/2211/2212 User Guide
4 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
View terminal type
The Terminal Type option shows the handset type used by the system. The Terminal Type option
is for display purposes only. You cannot edit this option.
To view the terminal type
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Terminal Type .
3 Press the Select button (or OK) to select Terminal Type .
4 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
View extension
The Extension option enables the user to view the extension number for the WLAN Handset. This
number is used to identify the handset. It displays when the handset is in the standby state.
Note: The extension for the handset cannot be changed on the handset.