Nordic Star Products MFC-3420C - Manual (Page 55)

GETTING STARTED 4 - 2
Setting the Station ID
You should store your name or company name and fax number on
all fax pages that you send.
It is important that you enter the fax number in the internationally
standardised format, i.e. in accordance with the following strict
sequence:
■
The “+” (plus) character (by pressing key)
■
Your Country Code (e.g. “44” for the United Kingdom, “41” for
Switzerland)
■
Your local area code minus any leading “0” (“9” in Spain)
■
A space
■
Your number on the local exchange, using spaces to aid
readability as appropriate.
As an example, if the machine is installed in the United Kingdom and
the same line is to be used for both fax and voice calls, and your
national telephone number is 0161 444 5555, then you must set the
fax and telephone number parts of your station ID as:
+44 161 444 5555.
1
Press Menu/Set , 0 , 3 .
2
Enter your fax number (up to 20
digits).
Press Menu/Set .
3
Use the dial pad to enter your name
(up to 20 characters).
Press Menu/Set .
4
Press Stop/Exit .
The LCD will go back standby mode automatically.
You cannot enter a hyphen.
If the Station ID has already been programmed, the LCD will ask
you to press
1 to make a change or 2 to exit without changing.
3.Station ID
Fax:
Name: