Nordic Star Products MFC-3420C - Manual (Page 58)

4 - 5 GETTING STARTED
Setting the Phone Line Type (MFC-3820CN only)
If you are connecting this machine to a PBX or PABX, you need to
change the Phone Line Type to PBX by completing the following
steps. If you are connecting this machine to a phone line that is also
using a ADSL (Asymmetric Digital Subscriber Line) to send and
receive faxes, it is also necessary to change the Phone Line Type to
ADSL by completing the following steps.
1
Press Menu/Set , 0 , 5 .
2
Press or to select PBX ,
ADSL (or Normal ).
Press Menu/Set .
3
Press Stop/Exit .
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the machine supports timed break recall only (TBR),
PABX normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
when the
Tel/R key is pressed.
You can program a Tel/R keypress as part of a number stored
in a Speed-Dial location. When programming the Speed-Dial
number (Function menu 2-3-1 or 2-3-2) press
Tel/R first (the
screen displays "!"), then enter the telephone number. If you do
this, you do not need to press
Tel/R each time before you dial
using a Speed-Dial location. (See Storing numbers for easy
dialling on page 7-1.)
However, if PBX is set to Off , you cannot use the Speed-Dial
number that the Tel/R key press is programmed into.
5.Phone Line Set