Nordic Star Products MFC-3420C - Manual (Page 95)

SETUP SEND 6 - 19
Changing the TX Lock Password
1
Press Menu/Set , 2 , 0 , 1 .
2
Press or to choose
Set Password .
3
Press Menu/Set .
The screen prompts you to enter the
old password.
4
Enter the current password.
5
Press Menu/Set .
6
Enter a 4-digit number as a new
password.
7
Press Menu/Set .
The screen prompts you to re-enter
the new password.
8
Enter the new password again and press Menu/Set .
9
Press Stop/Exit .
Switching TX Lock ON
1
Press Menu/Set , 2 , 0 , 1 .
2
Press or to choose
Set TX Lock .
3
Press Menu/Set . The screen
prompts you to enter the password.
4
Enter a 4-digit password, followed by Menu/Set .
This is the same as the security password of the machine
already stored.
The screen displays Accepted for 2 seconds, followed by
TX Lock Mode - TX Lock is now switched ON.
If the password you enter at Step 4 is incorrect, the screen
would display
Wrong Password . After 2 seconds the display
will then return to normal (displaying the date & time). You must
then start from Step 1 to set TX Lock.
1.TX Lock
Old Passwd:XXXX
New Passwd:XXXX
Verify:XXXX
1.TX Lock
Password:XXXX