Nordic Star Products MFC-3420C - Manual (Page 84)

6 - 8 SETUP SEND
Manual and automatic fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause , and then press Mono Start or Colour Start to try
again. If you want to make a second call to the last number dialled,
you can save time by pressing
Redial/Pause and Mono Start or
Colour Start .
Redial/Pause only works if you dialled from the control panel.
If you are sending a fax automatically and the line is busy, the
machine will automatically redial up to three times at five minutes
intervals.
Colour fax transmission
Your machine can send a colour fax to machines that support this
feature.
However, colour faxes cannot be stored in the memory, so Delayed
fax and Polling Transmit features are not available.
1
If it is not illuminated in green, press ( Fax ).
2
Load your document. (See Load documents on page 2-1.)
3
Enter the fax number using the dial pad, Speed-Dial or Search.
4
Press Colour Start .
When you send a colour fax, the machine will send it in real time
(even if
Real Time TX is set to Off ).
You can not send multiple pages from the scanner glass.