What you need to get started, Software programming choices, Safety information – National Instruments Module NI PXI-8250 User Manual
Page 9
Chapter 1
Getting Started
1-2
ni.com
What You Need to Get Started
To set up and use the NI PXI-8250 module, you must have the following
items:
❑
An NI PXI-8250 System Monitor module
❑
An NI PXI-1042, NI PXI-1042Q, or NI PXI-1045 chassis
❑
This manual
❑
Optional: The NI System Monitor 1.1 driver software and
documentation
Software Programming Choices
The NI System Monitor software includes a simple but powerful high-level
application programming interface (API) that makes creating custom
applications for the NI PXI-8250 easy. Refer to the
NI System Monitor 1.1 Help for information on the API.
Safety Information
Caution
The following paragraphs contain important safety information you must follow
when installing and operating the NI PXI-8250, and all devices connecting to the
NI PXI-8250.
Do not operate the device in a manner not specified in this document.
Misuse of the device can result in a hazard. You can compromise the safety
protection built into the device if the device is damaged in any way. If the
device is damaged, return it to National Instruments (NI) for repair.
Do not substitute parts or modify the device except as described in this
document. Use the device only with the chassis, specified in the installation
instructions. You must have all covers and filler panels installed during
operation of the device.
Do not operate the device in an explosive atmosphere or where there may
be flammable gases or fumes. If you must operate the device in such an
environment, it must be in a suitably rated enclosure.