NetComm NP6800 User Manual
Page 17
Advertising
Rev.1 - YML655
www.netcomm.com.au
NP6800 - Wireless LAN Access Point
Page 17
2. Double-click on
WEP Key and select the identification number of the WEP key you wish to
use.
3. Double-click on the Key you will be using and enter the encryption key that you will be
using.
Note: You must use the same WEP key identification number and encryption key in the
Access Point that you will be using in all accessing wireless stations, i.e. other
Access Points, PCMCIA cards or USB adaptors.
4. Click the
Set button to complete the changes.
Advertising