Netopia R7200 - Manual (Page 156)

14-6 User’s Reference Guide
If the package does not match the first inspector’s criteria, it goes to the second inspector, and so on. You can
see that the order of the inspectors in the line is ver y impor tant.
For example, let’s say the first inspector’s orders are to send along all packages that come from Rome, and the
second inspector’s orders are to reject all packages that come from France. If a package arrives from Rome,
the first inspector sends it along without allowing the second inspector to see it. A package from Paris is
ignored by the first inspector, rejected by the second inspector, and never seen by the others. A package from
London is ignored by the first two inspectors, so it’s seen by the third inspector.
In the same way, filter sets apply their filters in a par ticular order. The first filter applied can for ward or discard
a packet before that packet ever reaches any of the other filters. If the first filter can neither for ward nor discard
the packet (because it cannot match any criteria), the second filter has a chance to for ward or reject it, and so
on. Because of this hierarchical structure, each filter is said to have a priority. The first filter has the highest
priority, and the last filter has the lowest priority.
How individual filters work
As described above, a filter applies criteria to an IP packet and then takes one of three actions:
■ For wards the packet to the local or remote network
■ Blocks (discards) the packet
■ Ignores the packet
A filter for wards or blocks a packet only if it finds a match after applying its criteria. When no match occurs, the
filter ignores the packet.
packet
first
filter
match?
yes
for ward
discard?
to network
discard
(delete)
forward
no
to next
filter
send
or