Netopia R7200 - Manual (Page 84)

10-2 User’s Reference Guide
NAT works by remapping the source IP address of traffic from the LAN to a single static or dynamically assigned
IP address shown to the remote side of the router.
The feature can be implemented on a per–connection profile basis. The network router can use two or more
connection profiles simultaneously to connect to two or more networks. Each profile can have NAT enabled.
When NAT is enabled, the Netopia R7200 can use either a statically assigned IP address or one dynamically
assigned each time the router connects to the ISP. While a dynamically assigned IP address offers the ISP more
flexibility, it does have an impor tant limitation: the router requires a static IP address to suppor t Web, FTP, or
other ser vices available to the WAN. To suppor t these ser vices with NAT enabled, a ser vice can be associated
with only one machine on the LAN.
When connected to the Internet or some other large network using NAT, the individual machines on your LAN are
not directly accessible from the WAN. NAT provides an inherently secure method of connection to the outside
world.
163.167.132.1
192.168.1.100
192.168.1.102
192.168.1.103
192.168.1.104
192.168.1.105
192.168.1.106
163.167.132.1
163.167.132.1
163.167.132.2
163.167.132.2
163.167.132.3
163.167.132.3
163.167.132.4
163.167.132.4
163.167.132.5
163.167.132.5
163.167.132.6
163.167.132.6
Without NAT
With NAT
HOW NAT WORKS
ISP*
*or corporate intranet router