Ipx packet filters, Viewing and modifying packet filters, Adding a packet filter – Netopia R7200 User Manual

Page 172: Ipx packet filters -22

Advertising
background image

14-22 User’s Reference Guide

The items in the IPX Filters and Filter Sets screen are grouped into four areas:

IPX packet filters

IPX packet filter sets

IPX SAP filters

IPX SAP filter sets

The following sections explain the items in each of these areas.

IPX packet filters

For each IPX packet filter, you can configure a set of parameters to match on the source or destination
attributes of IPX data packets coming from or going to the WAN.

Viewing and modifying packet filters

To display a view-only table of IPX packet filters, select Display/Change IPX Packet Filters in the IPX Filters and
Filter Sets screen.

To modify any of the filters in the table, select the desired filter and press Return to go to the Change Packet
Filter screen. The parameters in this screen are the same as the ones in the Add Packet Filter screen (see the
next section).

Adding a packet filter

To add a new IPX packet filter, select Add IPX Packet Filter in the IPX Filters and Filter Sets screen and press
Return. The Add Packet Filter screen appears.

By default, the filter’s socket numbers and network and node addresses are null (all zeros). This sets the filter
to match on any IPX data packet. Configure the filter using criteria that meet your security needs.

Add Packet Filter

Filter Name: IPX Filter 1

Source Network: 00000000
Source Node Address: 000000000000
Source Socket: 0000

Destination Network: 00000000
Destination Node Address: 000000000000
Destination Socket: 0000

ADD FILTER NOW CANCEL

Configure a new IPX Packet Filter. Finished? ADD or CANCEL to exit.

Advertising