Netopia R7200 User Manual
Page 54
7-8 User’s Reference Guide
The final step in configuring the Easy Setup console screens is to restar t the Netopia R7200, so that the
configuration settings take effect.
1.
Select RESTART DEVICE. A prompt asks you to confirm your choice.
2.
Select CONTINUE to restar t the Netopia Router and have your selections take effect.
Note: You can also restar t the system at any time by using the Restar t System utility (see
) or by turning the Netopia Router off and on with the power switch.
The Router will restar t and your configuration settings will be activated. You can then Exit or Quit your Telnet
application.
Easy Setup is now complete.
Easy Setup Security Configuration
It is strongly suggested that you password-protect configuration access to your
Netopia. By entering a Name and Password pair here, access via serial,
Telnet, SNMP and Web Server will be password-protected.
Be sure to remember what you have typed here, because you will be prompted for
it each time you configure this Netopia.
You can remove an existing Name and Password by clearing both fields below.
Write Access Name:
Write Access Password:
PREVIOUS SCREEN TO MAIN MENU RESTART DEVICE
Configure a Configuration Access Name and Password here.