Nortel Networks 330 User Manual

Page 58

Advertising
background image

User Guide SoundPoint IP 330/320

3 - 16

6.

Press

to select the speed dial index for edit.

7.

Do one of the following steps:
Enter the next available speed dial index.
Delete the existing speed dial index by using the Backspace soft key,

and then enter a new speed dial index.

8.

Press the Ok or Cancel soft keys to accept or cancel changes.

9.

Press

repeatedly to return to the idle display.

To assign a new speed dial key:

1.

Press and hold

if unassigned.

A new empty entry in the contact directory is automatically opened
allowing contact information to be added.

2.

Press

to enter a first name.

3.

Enter the first name of the contact from the dial pad.

4.

Press the Ok or Cancel soft keys to accept or cancel changes.

5.

Press

to display the next field in the contact’s entry.

6.

Repeat steps 2 to 5 to enter the last name of the contact.

7.

Repeat steps 2 to 5 to enter a contact number.

8.

Repeat steps 2 to 5 to change the Speed Dial Index if desired.
The index can be any value between the next available index value and the
maximum (99).

9.

Press the Yes or Cancel soft keys to accept or cancel changes.

10.

Press

repeatedly to return to the idle display.

Note

Press and hold the unassigned Line 2 key from the idle display to associate a
speed dial index. The next available speed dial index will be assigned
automatically.

Polycom recommends that you assign speed dial index values consecutively.
For example, the second Line Key is assigned to the speed dial index value “2”.

Note

To add a speed dial contact if the Line 2 key is already assigned, refer to

Adding

Contacts

on page

1-1

.

Advertising
This manual is related to the following products:

320