Net Optics 4xN1000 - Manual (Page 21)

4xN 10/100/1000 Span Port iMatrix Switch
17
Field Name Value Description
Switch Hardware
Version Displays the hardware version of the switch
Switch Software
Version Displays the software version of the switch
Switch Control
Web Manager lets you set which data port is connected to the Monitor Port. To
change the network link you are monitoring, enter the number of the data port for
the link and click Submit Changes.
To disconnect the Monitor Port from all data ports, select Yes from the Reset All
Switches drop-down menu and click Submit Changes.
Confi guring the iMatrix Switch
Web Manager allows you to set the IP parameters for the switch. To change a set-
ting, enter the IP address in the text box and click Submit Changes. The following
table explains each available option.
Field Name Function/Value Description
IP Address 0.0.0.0 IP address of the iMatrix Switch. The de-
fault IP address is 10.60.0.123. You can
change the IP address by typing a new IP
address in the text box.
Net Mask 0.0.0.0 Displays current Net Mask of the
iMatrix Switch. The default Net Mask is
255.255.0.0. You can change the Net
Mask by typing a new Net Mask in the
text box.
Manager IP
Address 0.0.0.0 IP address of the computer running
iMatrix System Manager over a WAN.
You can change the IP address by typing
a new IP address in the text box.
Gateway IP
Address 0.0.0.0 Displays the IP address of the current
WAN Gateway. You can change the
Gateway by typing a new IP address in
the text box.