Net Optics 4xN1000 - Manual (Page 8)

4
4xN 10/100/1000 Span Port iMatrix Switch
Product Diagrams
Figure 1: Front Panel ISW-CU3-S4X16
Figure 2: Rear Panel
LED Indicators
Monitor Port LEDs: Each Monitor Port has a 2-character LED that shows
the number of the Span port currently connected to the monitor port.
Link/Activity Indicator: If a good link is established, the LED illuminates a
steady green. If there is current activity on this link, the LED fl ashes.
10/100/1000 Indicator: If the Port is set to 10 Mbps, the LED will illuminate
orange. If the Port is set to 100 Mbps, the LED will illuminate yellow. If the
Port is set to 1000 Mbps, the LED will illuminate green.
PWR 1/ PWR 2: Main and Redundant Power. If the Tap is deployed with
both power supplies, both LEDs illuminate when the Tap is connected to
power. An off power LED indicates that the corresponding power supply is
not functioning or not connected.
11 12
13 15 16 14
9 10 3 4
5 7 8 6
1 2
4x16 10/100/1000 Span Port Switch
1
Daisy Chain Daisy Chain
2
Monitor 2 Monitor 1 Daisy Chain Daisy Chain Monitor 4 Monitor 3
Monitor Port LED Displays Power LEDs Span Port Connectors
Monitor Ports
Monitor Daisy Chain Ports
Control Ports
DIP Switch
Remote Interface
Port
Power Plug
Rubber Feet
(removable) Rubber Feet
(removable)
Daisy Chain
Control Ports
Power Plug
CONTROL PORT 2 CONTROL PORT 1
OFF
1 3 4 5 6 7 8 2