Net Optics 4xN1000 - Manual (Page 33)

4xN 10/100/1000 Span iMatrix Switch
29
2. For the parameter you wish to confi gure, click on the corresponding value fi eld.
3. Select an option from the drop-down list or enter a new value from your
keyboard.
4. The new confi guration parameters take effect next time System Manager polls
the iMatrix Switch.
The table below describes the confi guration options on the Confi gure Tab.
Host Name The name of the iMatrix Switch
IP Address The IP address of the iMatrix Switch.
Netmask The IP address netmask.
Gateway IP Address The IP address of the gateway.
System Manager IP
Address The IP address of the host PC running System Manager
or third-party SNMP management tool.
Monitor Port 1
Parameter The speed setting for Monitor Port 1 (GigaBit, 10 Mbps, or
100 Mbps).
Monitor Port 2
Parameter The speed setting for Monitor Port 2 (GigaBit, 10 Mbps, or
100 Mbps).
Monitor Port 3
Parameter The speed setting for Monitor Port 3 (GigaBit, 10 Mbps, or
100 Mbps).
Monitor Port 4
Parameter The speed setting for Monitor Port 4 (GigaBit, 10 Mbps, or
100 Mbps).
Viewing iMatrix Switch Information
System Manager allows you to view the current iMatrix Switch confi guration
information, including the Monitor Port connections.
To view iMatrix Switch information:
1. Click the image of the iMatrix Switch you want to view in the System Frame. A
window similar to Figure 27 appears.