Net Optics 4xN1000 - Manual (Page 36)

4xN 10/100/1000 Span iMatrix Switch
32
Controlling Switch Connections
Use the Control Tab to connect the Monitor Ports to a connected Span Port. You
can connect four monitoring devices to any four Span Ports on the switch or
daisy-chained switches.
To connect a Monitor Port to a Span Port:
1. Click the Control tab. Figure 29 shows the Control Tab for a 2xN iMatrix
Switch. The 4xN GigaBit Copper Span Switch will show four Monitor Port
columns.
Figure 29: Control Tab
2. Click a port in the Mon. 1 column to connect the device on Monitor Port 1
to a Span Port. The example in Figure 30 shows Monitor Port 1 connected to
Span Port 2.