Removing the secondary hard disk, Replacing the secondary hard disk – NCR 7458 User Manual
Page 47
Advertising
Chapter 3: Hardware Service 3-23
Removing the Secondary Hard Disk
1. Lift the Hard Disk Release Latch on the Hard Disk Bracket and
slide the drive assembly to the side as shown below to disengage it
from the chassis.
20330
Release Latch
Hard Disk
2. Disconnect the Hard Disk cables.
Replacing the Secondary Hard Disk
1. Verify the jumper settings on the Hard Disk is set to Master.
20421
Master Setting (Pins 7-8)
7 5 3 1
8 6 4 2
Advertising