NCR 7458 User Manual
Page 58
Advertising
3-34 Chapter 3: Hardware Service
12. Position the Heat Sink and Fan Assembly over the CPU (align the
Key) and lower it onto the CPU.
Caution:
Make sure the Key is between the CPU and the
connector. Otherwise the CPU will overheat.
17925
Key
13. Hook the Clip on the left side of the CPU Socket. Then push down
on the Retaining Clip on the right side of the socket and hook it to
the socket.
19544a
Retaining Clip
14. Plug the Fan Harness into the Motherboard (CN10).
Advertising