NordicTrack ViewPoint NTL13007.0 - Manual (Page 20)

20
During each segment of the program, the console
will compare your heart rate to the target heart
rate setting for that segment. If your heart rate is
too far below or above the target heart rate set-
ting, the speed and/or incline will automatically in-
crease or decrease to bring your heart rate closer
to the target heart rate setting. Each time the
speed and/or incline of the treadmill is about to
change, the speed setting and/or incline setting
will flash on the screen to alert you, regardless of
which display mode is selected.
If pulse program 2, 3, or 4 is selected, a series
of tones will sound when the first segment of the
program ends. The arrow below the program pro-
file will then move one position to the right. The
program will continue in this way until the arrow
reaches the right end of the program profile. The
walking belt will then slow to a stop.
If the speed settings and/or incline settings are too
high or too low, you can change the intensity level
of the program at any time by pressing the in-
crease and decrease buttons beside the User but-
ton to change the target heart rate setting or the
maximum target heart rate setting.
To stop the program at any time, press the Stop
button. To restart the program, press the Start but-
ton. The walking belt will begin to move at 1 mph.
When the console compares your heart rate to the
target heart rate setting for the current segment of
the program, the speed and/or incline of the tread-
mill will automatically change to bring your heart
rate closer to the target heart rate setting.
7. Select a display mode and follow your
progress with the exercise information on the
screen.
See step 6 on page 17.
8. Turn on the fan if desired.
See step 8 on page 17.
9. When you are finished exercising, remove the
key from the console.
See step 9 on page 17.