F - i – National Instruments Module SCXI-1125 User Manual
Page 92
Glossary
© National Instruments Corporation
G-5
F
filtering
A type of signal conditioning that allows you to remove unwanted signal
components from the signal you are trying to measure.
FSR
full-scale range
G
gain
The factor by which a signal is amplified, sometimes expressed in decibels.
gain accuracy
A measure of deviation of the gain of an amplifier from the ideal gain.
gain error
See gain accuracy.
GND
ground
H
Hz
hertz
I
I/O
input/output—The transfer of data to/from a computer system involving
communications channels, operator interface devices, and/or data
acquisition and control interfaces.
in.
inch
input bias current
The current that flows into the inputs of a circuit.
input impedance
The measured resistance and capacitance between the input terminals of a
circuit.