Caution, Safety instructions – Numark Industries TT1910 User Manual
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within the
equilateral triangle is intended to alert the user to the presence
of un-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within the equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying this appliance.
FOR USA & CANADIAN MODELS ONLY
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
1. Read Instructions - All the safety and operating
instructions should be read before this product is connected
2. Retain Instructions - The safety and operating
instructions should be kept for future reference.
3. Heed Warnings - All warnings on this product and in these
operating instructions should be followed.
4. Follow Instructions - All operating and other instructions
should be followed.
5. Water and Moisture - This product should be
kept away from direct contact with liquids.
6. H e a t - Avoid placing this product too close to any
high heat sources such as radiators.
7. Power Sources - This product should be
connected to a power supply only of the type
described in these operating instructions, or as
marked on the unit.
8. Power Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked upon or pinched by items placed on or against
them. When removing the cord from a power outlet
be sure to remove it by holding the plug attachment
and not by pulling on the cord.
9. Object and Liquid Entry - Take care that
objects do not fall into and that liquids are not spilled
into the inside of the mixer.
10. Damage Requiring Service - This product
should be serviced only by qualified personnel. If you
have any questions about service please contact
Numark at the number(s) shown on the back cover
of this manual.
11. Grounding or Polarization - Precautions
should be taken so that the grounding or polarization
means built into the mixer is not defeated.
N O T E : This apparatus does not exceed the
Class A/Class B (whichever is applicable) limits for
radio noise emissions from digital apparatus as set out
in the radio interference regulations of the Canadian
Department of Communications.
WARNING: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture. Electrical equipment should NEVER be
kept or stored in damp environments.
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the
dealer from whom you purchased the unit. Retain this information for your records. Please return the warranty
card enclosed to register your mixer with us.
DATE OF PURCHASE:________________________
Numark - The Proven Leader in DJ Technology
©1997 Numark Industries