Numark Industries TT1910 User Manual
Page 8
Professional Disc Jockey Products
Warranty and Service Information
Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each
new product manufactured and/or supplied by it to be free from defects in material or
workmanship under conditions of normal use and service for 360 days, beginning on the date of
purchase from an authorized Numark Dealer, but not to exceed 2 years from date of shipment by
Numark.
The Numark obligation under this warranty is limited to repairing or replacing, at its option, the
product or part(s) therein; which upon examination by Numark shall appear to be defective or not
up to factory specifications; providing the Numark product is returned (transportation prepaid) to
Numark.
Numark shall not be liable for any damages, consequential or otherwise, resulting from the
use and operation of this product and makes no other warranty(s) either express or implied on
this product, including any warranty of merchantability.
This warranty does not extend to any of our products which have been subjected to
misuse, neglect, accident, incorrect wiring not our own, improper installation, or use in violation of
instructions furnished by us, nor extended to units which have been repaired or altered outside of
our factory, nor to cases where the serial number thereof has been removed, defaced, or
changed, nor to accessories used therewith not of our own manufacture. Numark reserves the
right to make changes or improvements in its products, during subsequent production, without
incurring the obligation to install such changes or improvements on previously manufactured
equipment.
To place this warranty into effect, the enclosed WARRANTY REGISTRATION CARD must
be returned to Numark Industries, LLC within thirty (30) days after date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Some states do not allow the exclusion or limitation of incidental or consequential damages so
the above limitation or exclusion may not apply to you.
EQUIPMENT TRANSPORT
A Return Authorization number should be obtained from Numark through the addresses or
phone numbers below.
It is the customer’s obligation, when returning faulty equipment, to properly pack the Numark
equipment in its original packaging. Failure to do so may inadequately protect the equipment in
transit and, therefore, jeopardize the customer’s warranty. The defective Numark equipment
should be sent, FREIGHT PREPAID with Return Authorization number to:
NUMARK INDUSTRIES
11 Helmsman Road
North Kingstown, RI 02852 U.S.A.
Attention: Service Department
T e l e p h o n e : + 1 ( 4 0 1 ) 2 9 5 - 9 0 0 0
Fax:
+ 1 ( 4 0 1 ) 2 9 5 - 5 2 0 0
E-mail:
n u m a r k @ n u m a r k . c o m