Display and navigate a menu, Quickstart guide – NorthStar Navigation Northstar NS100 User Manual

Page 12

Advertising
background image

Quickstart Guide

Quickstart Guide

Quickstart Guide

11

3. Press >ENT to display that option. Make any

entries or changes, if required.

4. Press >ENT to confi rm changes OR press

<ESC to keep the original entry. Any changes
are active as soon as you exit the menu.

5. Press <ESC to backup to the previous screen

or to exit the menu completely.

Only a few menu options can be displayed at
any one time on the LCD screen. To show the
menu options:
1. Press FUNC then press 1 to display the fi rst

four radio menu options OR press CALL to
display the DSC call menu.

2. Press ^CH/SEL or CH/SELv to scroll up and

down the menu until the cursor is postioned
at the desired option.

Display and navigate a menu

Button

Function

Escape. Press to cancel any
changes, return to the previous
mode, or backup.

Enter. Press to confi rm and accept
any input or changes.

Function. Provides access to the
following useful radio functions
when combined with the button
number indicated:

FUNC 1

Radio Menu mode. Press FUNC
then 1 to display the radio
menu and DSC setup options
and to enter menu mode. (Also
see Reference Section 1 and
Reference Section 2.)

FUNC 3

Backlighting. Press FUNC then 3
to set the backlight level for the
LCD screen and handset buttons.
(Also see Adjust the backlighting.)

FUNC 4

Hailer. NS100 DS only. Press FUNC
then 4 to enter hailer mode. (Also
see Use the hailer on the NS100
DS.)

Button

Function

FUNC 6

Intercom. NS100 DS only. Pick up
your handset, then press FUNC
then 6 to activate the intercom.
(Also see Use the intercom on the
NS100 DS.)

FUNC 7

Transmission power. Press FUNC
then 7 to change the transmission
power setting. Press FUNC then
7 again to return to the previous
setting.

FUNC 9

Fog mode. NS100 DS only. Press
FUNC then 9 to enter the fog
mode. (Also see Use the foghorn.)

Distress. (Red button located
on right hand side of handset).
To make a distress call, lift the
hinged protective cover from
the button. Then either press
DISTRESS to show the Nature of
Distress categories OR hold down
DISTRESS to send an undefi ned
distress call. (Also see Reference
Section 5 - Send a Distress call.)

Advertising