NorthStar Navigation Northstar NS100 - Manual (Page 26)

25
Reference Manual
Select the time format
1. Move the cursor to GPS/DATA and press
>ENT.
2. Move the cursor to SETTING and press
>ENT.
3. Move the cursor to TIME FORMAT and press
>ENT. There is a choice of a 12 hour time
format that uses AM and PM suffi xes, or a 24
hour time format.
4. Press >ENT again to select the 12 hour time
format
OR
move the cursor to 24 and then press >ENT
to select the 24 hour time format.
The new time format is displayed immediately.
Show or hide the time
BUDDY LIST
LOCAL/DIST
USA/INT/CAN
>GPS/DATA GPS/DATA
MANUAL
>SETTING
SETTING
TIME OFFSET
TIME FORMAT
>TIME DISPLY TIME DISPLAY
>ON
OFF
If you have entered the time manually (see
Reference Section 1 - Set your position and
time manually), the time is always shown on
the screen with the prefi x MAN.
However, if the time is being updated through
a GPS navigation receiver, you can show or
hide the time on the LCD screen.
1. Move the cursor to GPS/DATA and press
>ENT.
2. Move the cursor to SETTING and press >ENT.
3. Move the cursor to TIME DISPLY and press
>ENT again.
4. Press >ENT again to have the LCD screen
show the time
OR
move the cursor to OFF and then press <ENT
to hide the time.
BUDDY LIST
LOCAL/DIST
USA/INT/CAN
>GPS/DATA GPS/DATA
MANUAL
>SETTING
SETTING
TIME OFFSET
>TIME FORMAT
TIME DISPLY TIME FORMAT
>12
24
23:30 LOC PORT OPS
N 35’.43.211’
E123’45.113’
11.30PM LOC