NorthStar Navigation Northstar NS100 - Manual (Page 35)

34
Northstar NS100
Delete a group MMSID
GROUP SETUP
MANUAL NEW
FISHING
>WATERSKIERS LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP DSC SETUP
USER MMSID
>GROUP SETUP
INDV REPLY WATERSKIERS
EDIT
>DELETE DELETE GROUP
WATERSKIERS
ENT>YES
ESC>NO
1. Select DSC SETUP and press >ENT.
2. Move the cursor to GROUP SETUP then
press >ENT. The existing group MMSID
names are listed.
3. Move the cursor to the group MMSID name
that you want to delete, then press >ENT.
4. The group name is shown. Move the cursor
to DELETE and press >ENT.
5. Press >ENT again to confi rm the deletion or
<ESC to cancel the deletion and return to the
GROUP SETUP option, .
Select your response to individual calls
If you are operating on the USA or Canadian
channel banks, you can choose to respond to
incoming individual calls with an automatic or
manual response.
An automatic response sends an
acknowledgement and then sets the request
link channel, ready for a conversation.
A manual response asks if you want to
acknowledge the call, and then asks if you
want to converse with the caller.
1. Select DSC SETUP and press >ENT.
2. Move the cursor to INDV REPLY and press
>ENT.
3. Press >ENT again if you want to select AUTO
for an automatic response,
OR
move the cursor to MANUAL and then press
<ENT for a manual response.
LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP DSC SETUP
USER MMSID
GROUP SETUP
>INDV REPLY INDV REPLY
>AUTO
MANUAL
European radio models
require a manual
acknowledgement.