NorthStar Navigation Northstar NS100 - Manual (Page 34)

33
Reference Manual
Edit a group MMSID
4. Enter the group name along the dashed line.
In this example the group name is FISHING.
The group name can contain a maximum of
11 alphanumeric characters.
The cursor automatically moves to the next
space after you enter each digit. If you make
an error, press <ESC to backup and correct
the entry.
When you have fi nished, press >ENT
(repeatedly if necessary) until the cursor
moves to the MMSID line.
5. Enter the group MMSID. Remember that
the fi rst number is always 0. The cursor
automatically moves to the next space after
you enter each digit. If you make an error,
press <ESC to backup and correct the entry.
When you are fi nished, press >ENT.
6. The group name and group MMSID are
shown in a confi rmation screen. Press >ENT
to store the details and return to the GROUP
SETUP option.
GROUP SETUP
FISHING
>WTERSKIERS
RACERS LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP DSC SETUP
USER MMSID
>GROUP SETUP
INDV REPLY WTERSKIERS
067890123
>EDIT
DELETE EDIT NAME
WTERSKIERS
EDIT MMSID
067890123 WATERSKIERS
067890123
ENT>STORE
ESC>CANCEL
1. Select DSC SETUP and press >ENT.
2. Move the cursor to GROUP SETUP then
press >ENT. The existing group MMSID
names are listed.
3. Move the cursor to the group MMSID name
that you want to edit, then press >ENT.
4. The group name and group MMSID are
listed, with the cursor at the fi rst character
of the group name. Edit the group name, if
required, or press >ENT repeatedly to move
the cursor to the group MMSID. Make any
changes to the group MMSID number, if
required.
5. When you are fi nished, press >ENT to
confi rm the changes and return to the
GROUP SETUP option.