NorthStar Navigation Northstar NS100 - Manual (Page 27)

26
Northstar NS100
Show or hide the boat’s position
If you have entered the boat's position
manually (see Reference Section 1 - Set your
position and time manually), the position is
always shown on the screen with the prefi x
MAN.
However, if the boat's position is being updated
through a GPS navigation receiver, you can
show or hide the boat's position on the LCD
screen.
1. Move the cursor to GPS/DATA and press
>ENT.
BUDDY LIST
LOCAL/DIST
USA/INT/CAN
>GPS/DATA GPS/DATA
MANUAL
>SETTING
SETTING
TIME FORMAT
TIME DISPLY
>LL DISPLAY LL DISPLAY
>ON
OFF
2. Move the cursor to SETTING and press
>ENT.
3. Scroll through the GPS/DATA menu to LL
DISPLAY and press >ENT again.
4. Press >ENT again to have the LCD screen
show the boat's position
OR
move the cursor to OFF and then press <ENT
if you want to hide the boat's position.
GPS alert setting
BUDDY LIST
LOCAL/DIST
USA/INT/CAN
>GPS/DATA GPS/DATA
MANUAL
>SETTING
SETTING
TIME DISPLY
LL DISPLAY
>GPS ALERT GPS ALERT
>ON
OFF
The GPS alert is usually set to ON so that if
the GPS navigation receiver is disconnected,
warning alarm beeps sound.
1. Move the cursor to GPS/DATA and press
>ENT.
2. Move the cursor to SETTING and press
>ENT.
3. Scroll through the GPS/DATA menu to GPS
ALERT and press >ENT again.
4. Press >ENT again to have the GPS alert ON
OR
move the cursor to OFF and then press <ENT
to turn it off.