NorthStar Navigation Northstar NS100 - Manual (Page 49)

48
Northstar NS100
Manually reply to an LL position request
When the radio receives an LL position request
it sounds a beep to alert you to the request.
At the same time, the LCD screen displays the
TELEPHONE symbol, the position request and
the MMSID of the caller.
1. If you press <ESC, or do not respond to
the request within three minutes, the radio
returns to its previous state.
PORT OPS/VTS
N 39 27.021’
E135 12.011’
T 09:34 UTC POSITION REQ
123451234
ENT->ACK
ESC->EXIT PORT OPS/VTS
N 39 27.021’
E135 12.011’
T 09:39 UTC RCV:POSITION
123451234
ENT->ACK
ESC->EXIT
You can reply to this
request manually
only if you have set
the LL REPLY option
to MANUAL. (See
Reference Section 2
- Select your response
to LL polling calls.) 2. Press >ENT to acknowledge the call
and transmit your position on CH70
automatically.
The LL position request is not stored in the
call log.
Automatically reply to an LL position request
You can reply to this
request automatically
only if you have
set the LL REPLY
option to AUTO. (See
Reference Section 2
- Select your response
to LL polling calls.) When the radio receives an LL position request
it sounds a beep to alert you to the request.
At the same time, the LCD screen displays the
TELEPHONE symbol, the position request and
the MMSID of the caller.
The radio acknowledges the request
automatically, and immediately sends your
boat's position to the caller.
The radio then returns automatically to its
previous state.
PORT OPS/VTS
N 39 27.021’
E135 12.011’
T 09:34 UTC PORT OPS/VTS
N 39 27.021’
E135 12.011’
T 09:39 UTC RCV:POSITION
123451234
REPLY AUTO
ESC->EXIT 123451234
N 39 27.021’
E135 12.011’
T 09:39 UTC