Nikon NP4100 - Manual (Page 132)

7. Appendix
117
Troubleshooting
Indicator Messages
Several indicator messages are used by the projector to alert users of problems with
setup or internal parts. The LEDs on the top surface of the projector show the status of
the power, lamps 1 and 2 as well as the general working order of the projector through
the status LED (see OSD Controls and Status LEDS on page
8 for location). The follow-
ing tables describe the various states of the 4 LEDs.
The Power LED
P
ROJECTOR
S TATUS
LED C ONDITION LED S EQUENCE
P
ROJECTOR
C ONDITION
AC off Off Off Off
Cooling Orange blink
0.5 secs on
0.5 secs off
After power off
Power up sequence Green blink
0.5 secs on
0.5 secs off
Start up
Standby Orange on On Standby
Power on Green on On On
The Status LED
P ROJECTOR
S
TATUS
LED C ONDITION LED S EQUENCE
P ROJECTOR
C
ONDITION
Normal condition Off Off Power on
Cover ERROR
Red 1 time blink
(repeatedly) 0.5 secs on
2.5 secs off
ERROR
Temperature
ERROR Red 2 times blink
(repeatedly)
(0.5 secs ON > 0.5
secs OFF) * 2 > 2.0
secs OFF
ERROR
Fan ERROR
Red 4 times blink
(repeatedly)
(0.5 secs ON > 0.5
secs OFF) * 4 > 2.0
secs OFF
ERROR
Keylocked
(when push key)
Orange light up On
Keylocked function
enabled
Standby
(Power-saving)
Off Off
Standby
(Power-saving)
Standby (Normal) Green light On Standby (Normal)