Features – New Transducers TR-5001 User Manual
Page 20
Features
•
Support Pentium 4 Prescott (90nm) and Northwood(0.13um) CPU
with 400/533/800M FSB speed selectable. Intel VRD 10.1
compliant to support future advanced processor.
•
Dual Channel Memory bus doubles the data rate, up to
6.4GBytes/s. System memory speed can be DDR266,330 or 400,
selectable by BIOS setup.
•
Dual SATA ports with classic IDE, RAID0 or RAID 1 mode
configurable. Rebuild supported at RAID 1 mode with Intel IAA
software.
•
Dual Intel Gigabit Ethernet controller on board boost networking
throughputs up to 4Gbits/s in full-duplex mode.
•
Support Server-grade LAN features like Teaming,
Load-balancing and Fault-Tolerance in wire-speed.
•
Boot Agent with both RPL and PXE protocol support is integrated
in system BIOS for remote Boot functions.
•
LAN LED built-in RJ45 connector to display Speed, Link an
activities. External connector is available to display LAN status
on front Panel.
•
Two serious ports. One is RS232/422/485 selectable for remote
control and data access.
•
AC97 3D Audio CODEC on-board with Line-IN, Line-OUT,
Microphone and CD-IN interface. Audio + USB 2.0 cable kit is
available.
•
One LVDS connector supports diffused LVDS TFT 18-bits panels.
LVDS cable kit is available.
•
On-Board AT-P8 and ATX-12V Power connector support
stand-alone system configuration.
•
Four USB2.0 ports. USB2.0 cable kit is available to mount UBS
connector on chassis or bracket.
•
Support Hardware Monitor and Watch-Dog timers. System will
alert administrators while abnormal operation condition
happened.
•
Support remote wake up on LAN and Modem.
16
TR-5001 User Manual