New Transducers TR-5001 - Manual (Page 9)

Touchscreen
USB Controller Driver Installation
All Windows drivers are included on the Transduction TR-5001 8-wire Touchscreen Drivers
CD along with Troubleshooting.
NOTE: For Win XP and 2000 you MUST logon with administrator’s password.
TouchKit software on the driver CD has the required drivers and the utility for toggling
between left and right mouse buttons and configuration support. These will all be installed
when Setup.exe is run from the CD.
For Windows 2000/XP
When the New Hardware Found message comes up, choose Cancel. Run the Setup.exe
program from the driver CD.
Please note that the touch screen controller in the TR-5001 is USB and follow the prompts
accordingly.
Windows will copy the files to your hard drive and setup will be complete. (Windows XP will
give a warning message about the TouchKit Controller certification, press Continue anyway.)
Please reboot your computer.
Windows will now find the device automatically and it will be listed in the Device Manager as:
TouchKit USB Controller.
TouchKit Software
There are five property pages:
1. GENERAL: Language selection, add/remove devices, 4-point Calibration, Draw Test and
Advanced
4 pts Cal
Choose to calibrate your screen by touching the blinking symbol on the panel until you
get a beep or it stops blinking
Draw Test
Test the drawing position in relation to the display screen to verify panel linearity,
calibration capability and drawing line quality.
5 TR-5001 User Manual