New Transducers TR-5001 - Manual (Page 4)

Recommended Use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP
AND USING THE TR-5001-PM:
• •• • • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and
opening or removing covers may expose you to dangerous shock hazards or other
risks. Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal or may cause electric
shock, fire or equipment failure.
• Do not place any heavy objects on the power cord. Damage to the cord may cause
shock or fire.
•
Do not place this product on a sloping or unstable cart, stand or table, as the
monitor may fall, causing serious damage to the monitor.
• When operating the TR-5001 with its AC 125-240V power supply, use a power
supply cord that matches the power supply voltage of the AC power outlet being
used. The power supply cord you use must have been approved by and comply
with the safety standards of your country. (Type H05VV-F should be used in
Europe)
• In UK, use a BS-approved power cord with molded plug having a black (5A) fuse
installed for use with this monitor. If a power cord is not supplied with this monitor,
please contact your supplier.
•
Do not place any objects onto the monitor and do not use outdoors.
• The inside of the fluorescent tube located within the LCD monitor contains
mercury. Please follow the bylaws or rules of your municipality to dispose of the
tube properly.
Immediately unplug your unit from the power source and refer servicing to qualified service
personnel under the following conditions:
•
When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the unit.
•
If the unit has been exposed to rain or water.
•
If the unit has been dropped or the cabinet damaged.
• If the unit does not operate normally by following operating instructions.
• Do not bend power cord.
•
Do not use in high temperatured, humid, dusty, or oily areas.
• If glass is broken, handle with care.
• Do not cover vents on unit.
•
If monitor or glass is broken, do not come in contact with the liquid crystal and
handle with care.
• Allow adequate ventilation around the unit so that heat can properly dissipate. Do
not block ventilated openings or place near a radiator or other heat sources.
•
Handle with care when transporting. Save packaging for transporting.
TR-5001 User Manual 1 ii