New Transducers TR-5001 User Manual
Page 59
Channel 0
HDDs /
Channel 1
HDDs
The IDE adapters control the hard disk drive. Use a separate sub menu
to configure each hard disk drive. Figure 2 shows the IDE primary
master sub menu.
Use the legend keys to navigate through this menu and exit to the main
menu. Use the Table listed below to configure the hard disk.
Phoenix – AwardBIOS CMOS Setup Utility
IDE Cannel 0 Master
IDE HDD Auto-Detection [Press Enter]
IDE Channel 0 Master
[Auto]
Access Mode
[Auto]
Capacity
0 MB
Cylinder
0
Head
0
Precomp
0
Landing Zone
0
Sector
0
Item Help
Menu Level ¾¾
To auto-detect the HDD’s
size, head... on this channel
↑↓←→
Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
55
TR-5001 User Manual