New Transducers TR-5001 User Manual
Page 45
IrDA Connector
This connector is used for an IrDA connector for wireless
communication.
+5V IRRX IRTX
FIR GND
IrDA Pin #
Signal Name
1 +5V
2 FIR
3 Ir
RX
4 Ground
5 Ir
TX
ATX Power Connector
This is a four-pin connector to support the ATX power and
corresponding back-plane. When your back-plane is configured to
perform ATX power supply Soft-on/off function, you have to connect
the control signals and stand-by power on this connector to your
back-plane by a corresponding cable.
Pin #
Signal Name
1 PWR_GD
2
5V_SB (standby +5V)
4
3
PS-ON (soft on/off)
ATX-PWR
4 GND
Chassis Fan Power Connector
This is a 3-pin header for the chassis fan. The fan must be a 12V fan.
Pin #
Signal Name
1 Rotation
1 2 3
2
+12V
3
Ground
41
TR-5001 User Manual