Ricoh BIZWORKS 106 - Manual (Page 153)

8
SETTING UP
1 Attach the power cord to the machine
and plug the other end into a outlet.
2 Turn on the machine.
WARNING
• Only connect the machine to the power source described on the inside of the front cover.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power cord. Do not place heavy
objects on it, pull it hard or bend it more than necessary. These actions could cause an
electric shock or fire.
• Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock
might occur.
Turning On the Machine
Important!
When you turn on the machine for the first time after the installation, make sure
that no paper is loaded beforehand.