Ricoh BIZWORKS 106 - Manual (Page 311)

3
SETTING UP
1. SETTING UP
5 Make sure the plastic pins (marked with
“
* ” in the illustration next to step 3 )
on either side of the starter toner cas-
sette slide along the guides inside the
machine.
Note
Be sure to hold the starter toner cassette by its
handle.
6 To close the top unit, press down firmly
but gently on both sides of it until the
top unit closes and clicks securely into
place.
Note
Background gray cast is sometimes evident
just after installing a new toner cassette.
b(GB)6.5_Chapter 01_p01-09 99.8.3, 1:12 PM 3