Ricoh BIZWORKS 106 - Manual (Page 413)

105
TECHNICAL REFERENCE
8. TECHNICAL REFERENCE
Explanation
PCL Resolution
Set the printer to 300 dpi
if the designated output is
not obtained when printing
using a DOS application
compatible with the 300
dpi PCL printer.
Toner Saving mode
When Toner Saving is
turned on, the machine
prints using less toner. Use
this mode if you wish to
save on toner and do not
mind lighter prints.
Default
600dpi
Off
Bit
7
6
5
4
3
2
1
0
Available
Settings
0: 600dpi
1: 300dpi
0: Off
1: On
Do not change these settings
Do not change these settings
Notes
SWITCH 02
SWITCH 03
Explanation Default Bit
7
6
5
4
3
2
1
0
Available
Settings
Notes
Do not change these settings
b(GB)6.5_Chapter 08_p101-108 99.8.3, 1:18 PM 105