Ricoh BIZWORKS 106 - Manual (Page 317)

9
SETTING UP
1. SETTING UP
1 Attach the power cable to the machine
and plug the other end into an outlet.
2 Turn on the machine.
Note
You can select your preferred language used
on the operation panel and on reports.
☛ Selecting the Language, see page 107.
WARNING
• Only connect the machine to the power source described on the inside of the front cover.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power cable. Do not place heavy
objects on it, pull it hard or bend it more than necessary. These actions could cause an
electric shock or fire.
• Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock
might occur.
Turning On the Machine
Important!
Whenever you turn on the machine, make sure that no paper is loaded beforehand.
b(GB)6.5_Chapter 01_p01-09 99.8.3, 1:12 PM 9