Ricoh BIZWORKS 106 - Manual (Page 84)

66
FAXING
Registered
3 FaxSwitch O K
22 Slow(4800bps)
4800bps: No? O K
Prt Help List
Function no.: _ _
7 Repeat steps 5 and 6 for all adjust-
able volumes.
After adjusting the Ring volume and pressing
, the display opposite will appear. Now go
to step 8 .
Note
Do not turn off the machine while “Please
wait” or “Registered” is shown on the op-
eration panel display.
8
Do one of the following:
• Enter another function number.
• Press to return to standby mode.
Sending Faxes Over Unreliable Lines-Slow (4800bps)
If you experience problems sending faxes due to bad telephone lines, you
can reduce the speed at which your machine sends fax messages to 4800 bits
per second.
Note
This setting does not affect the speed at which your machine receives faxes.
Use the following procedure to turn this feature on/off.
1
Press .
2
Press .
3
Press .
4
Press .