Radio Shack 64 - Manual (Page 17)

17
3. Press again to select the broadcast
system ( TV or CABLE) .
4. Press to highlight AUTO SET , then press
. You see:
5. Set your cable box to the local PBS station,
then press CH s . (If you do not have a
cable box, simply press CH s.)
After you press CH s , CH AUTO SET PRO-
CEEDING and the current channel number
appear on the TV screen as the VCR scans
through the channels and memorizes all the
active channels in your area.
6. When the VCR finishes scanning and stor-
ing channels, it searches for an EDS signal
and shows:
It can take up to 10 minutes for the VCR to
set the clock using the EDS signal. If the
VCR finds a signal, it automatically sets its
RE
NEL
UE : ENGL I SH
Y
KEY
- - - - - - - - -
Y
KEY
ANNEL - - - -
AUTO SET
A CABLE
THEN. . .
A CABLE
YOUR
H UP KEY
AUTO CLOCK SET
PROCEEDING
CANCEL: PUSH STOP KEY
clock to the correct time and AUTO CLOCK
SET COMPLETED appears. Afterwards,
the VCR resets the clock by the received
EDS signal the first time you turn it off dur-
ing a day. If the VCR does not detect a sig-
nal within this time,
AUTO CLOCK SET
INCOMPLETE appears. There is probably
not an EDS signal available in your area.
Press
MENU/ACTION , then see “Manually
Setting the Clock” on Page 15 to set the
clock.
Changing the On-Screen Language
Follow these steps to change the on-screen
programming language.
1. Press MENU/ACTION to display the main
menu.
2. Repeatedly press or to highlight the
fifth menu selection, then press . (The
title of the fifth menu selection differs
depending on the language currently
selected.)
English
RE
NEL
UE : ENGL I SH
Y
KEY
- - - - - - - - -
Español
ON
NC I ONES
E : ESPAÑOL
- - - - - - - - -
Français
OSCOPE
O SUPPLEM
E
A : FRANÇA I S
- - - - - - - - -
16-634.fm Page 17 Tuesday, July 20, 1999 5:37 PM