Radio Shack 64 - Manual (Page 41)

41
Cannot see broadcast TV
programs using the VCR’s
tuner. TV/VCR is not set correctly. Repeatedly press TV/VCR until VCR
appears.
Audio/video connections are incorrect. Check all connections.
Cannot record from the input
jacks. Connections are incorrect. Check all connections.
INPUT is not set correctly. Select LINE 1 or LINE 2 .
No stereo sound for a stereo
recording. You have not connected the VCR’s R-AUDIO-L OUT jacks to a ste-
reo system or stereo TV. Connect the jacks to a stereo output.
The audio out setting is not correctly set. Set it to Hi-Fi (see “Re-
ceiving/Recording Stereo/SAP Broadcasts” on Page 34).
The VCR might not have adjusted tracking correctly. You might
need to manually adjust tracking (see “Tracking” on Page 31).
PROBLEM POSSIBLE SOLUTION
16-634.fm Page 41 Tuesday, July 20, 1999 5:37 PM