Tape motion controls, Real-time counter – Radio Shack 64 User Manual

Page 25

Advertising
background image

25

TAPE MOTION CONTROLS

Fast-Forward/Rewind and Visual
Search

While a tape is stopped, press

FAST-F

to ad-

vance the tape quickly or

REW

to rewind it. You

cannot see the picture or hear sound when you
use fast-forward or rewind, but you can use the
counter to locate a specific section of tape.

Note: If you press

POWER

while a tape is re-

winding,

REWIND

POWER

OFF

appears.

The VCR automatically turns itself off when re-
winding is complete.

To use visual search so you can see the pic-
ture, be sure VCR appears then begin tape
playback. Then press

FAST-F

to search forward

or

REW

to search in reverse. Press

PLAY

to re-

turn to normal playback.

During visual search, the sound is muted and
the picture quality is lower than during normal
playback. The search picture is best with tapes
recorded at the SP or SLP speed (see“Record-
ing Speeds/Tape Selection” on Page 33).

Freeze-Frame/Frame Advance

Freeze-frame lets you pause the tape to view a
single frame. Press

PAUSE

during playback to

freeze the picture. Press

PAUSE

again or

PLAY

to return to normal playback.

During freeze-frame, picture quality is lower
than during normal playback. The picture quali-
ty is best with recordings made at the SP or
SLP speed (see “Recording Speeds/Tape Se-
lection” on Page 33).

Notes:

• If you leave the VCR in the freeze-frame

mode for 3 minutes, the VCR stops playing
the tape to protect the video heads.

• To reduce or eliminate jitter in the freeze-

frame picture, hold down

CH

s or t until the

picture is clear.

During freeze-frame, you can advance the pic-
ture one frame at a time by repeatedly pressing

SLOW

. This feature works best with video cas-

settes recorded at the SP or SLP speed. Press

PAUSE

or

PLAY

to return to normal playback.

Slow Motion

To start slow motion playback, while a tape is
playing, press

SLOW

. Press

SLOW

again or

PLAY

to return to normal playback. During slow

motion, the sound is muted and the picture
quality is lower than during normal playback.
Slow motion picture quality is best with tapes
recorded at the SP or SLP speed.

Notes:

• If you leave the VCR in the slow-motion

mode for 3 minutes, the VCR stops playing
the tape to protect the video heads.

• If the slow-motion picture is poor, hold down

CH

s or t until the picture improves.

One Minute Skip (Model 64 Only)

You can skip over unwanted material on the re-
corded tape, such as commercials. Press

ZERO/1MIN

during playback. The VCR fast for-

wards over the next minute of recording, then
resumes normal playback.

REAL-TIME COUNTER

Using the Counter

Your VCR’s counter shows how long a tape
has been running. To see the counter on the
TV screen, press

DISP/ENT

on the remote con-

trol.

16-634.fm Page 25 Tuesday, July 20, 1999 5:37 PM

Advertising
This manual is related to the following products:

65