Useful functions to know, About the preset drum kits, Playing patterns to check drum kit tones – Roland TD-12 User Manual
Page 28: Restoring all settings to the factory settings, Restoring the factory settings to individual kits
28
Useful Functions to Know
The TD-12 is shipped from the factory with 50 pre-loaded
drum kits. These drum kits are referred to as
Preset Drum
Kits
.
The features of each preset drum kit, pad pattern function
settings, and other information is listed in the
(p. 84). Look through this list to find the kit you want
to use.
The preset patterns offer a convenient way to check the drum
kit sounds.
By selecting instruments and then playing back patterns with
these instruments, you can confirm the sounds of instrument
combinations; for example, kick and snare or snare and tom.
* You can use the [GROUP FADERS] to change the volume
balance and mute any unneeded instrument sounds.
This restores the TD-12 to the original factory settings
(
Factory Reset
).
All data and settings stored in the TD-12 are lost in
carrying out this operation. So if necessary, save your
data to an external MIDI device before executing the
factory reset.
(Bulk Dump; [SETUP] - [F1 (MIDI)] -[F5 (BULK)]; p. 75)
1.
Press [SETUP] - [F5 (F RESET)].
[SETUP] lights, and the “FACTORY RESET” screen
appears.
2.
Press [F5 (RESET)].
The confirmation screen appears.
* To cancel, press [F1 (CANCEL)].
3.
Press [F5 (EXECUTE)] to execute Factory
Reset.
When Factory Reset is finished, the “DRUM KIT” screen
appears.
When resetting individual drum kits whose instrument and/
or effect settings have been changed to the original factory
settings, use the Copy function (p. 70).
1.
Hold down [SHIFT] and press [SETUP].
[SETUP] lights, and the “COPY” screen appears.
2.
Press [F1 (KIT)].
fig.00-CopyKit_70
A:
copy-source type (PRESET or USER)
B:
copy-source
C:
copy-destination
About the Preset Drum Kits
Playing Patterns to Check
Drum Kit Tones
No.
Name
Use
1
DrumPreview1
To check the kick, snare, and hi-
hat sounds
2
DrumPreview2
To check the kick, snare, and ride
cymbal sounds
3
DrumFill 1
To check the tom and crash cym-
bal sounds
4
DrumFill 2
To check the tom and crash cym-
bal sounds
Restoring Edited Drum Kits to
the Factory Default Settings
Restoring All Settings to the Factory
Settings
Restoring the Factory Settings to
Individual Kits
A
C
B
TD-12_e.book 28 ページ ２００５年２月１８日 金曜日 午後６時３９分