Saving data, Loading data to the td-12 – Roland TD-12 User Manual

Page 75

Advertising
background image

75

Chapter 9. Settings for the Entire TD-12 [SETUP]

Chapter 9

[SETUP]

Saving Data

To save data, use the external sequencer as you would when
recording musical data, and perform the following steps on
the TD-12 as shown in the following diagram.

1.

Connect the TD-12’s MIDI OUT connector with a
MIDI cable to the MIDI IN connector of the
external sequencer.

fig.BulkDump.e

2.

Press [SETUP].

[SETUP] lights, and the “SETUP” screen appears.

3.

Press [F1 (MIDI)] - [F5 (BULK)].

The “MIDI BULK DUMP” screen appears.

fig.09-MidiBulk1_70

4.

Press [+/-], [VALUE], and [CURSOR (up/down)]
to select the content to be sent.

5.

Start the recording process of the external

sequencer.

6.

Press [F5 (EXECUTE)] to begin sending the

data.

fig.09-MidiBulk2_70

* If you want to stop sending, press [F5 (STOP)].

7.

When finished, the following screen appears.

fig.09-MidiBulk3_70

Bulk Dump is one kind of System Exclusive message. Be
sure to use an external MIDI sequencer that is capable of
recording System Exclusive messages. In addition,
confirm that the sequencer is not set to “Do not receive
System Exclusive messages.”

Loading Data to the TD-12

At this time, all the TD-12’s current data is overwritten.
Make sure you have made the needed backup.

1.

Connect the TD-12’s MIDI IN connector with a

MIDI cable to the MIDI OUT connector of the

external sequencer.

fig.BulkLoad.e

2.

Press “PLAY” on the external sequencer to

transmit the data to the TD-12.

Received data is written into the TD-12.

Saving Data to an external MIDI
Device (Bulk Dump) [F5 (BULK)]

Transmit Data

Description

ALL

All data, including setup, drum kits,
user percussion sets, user patterns

SETUP

Trigger, pad, and other kinds of set-
tings

ALL DRUM KITS

All data for drum kits 1–50

1 DRUM KIT

Only the data for the selected drum
kit

ALL TRIG BANKS

All settings for trigger banks 1–4

1 TRIG BANK

Only the settings for the selected
trigger bank

ALL PERC
GROUPS

All data for the user percussion sets
1–8

1 PERC GROUP

Only the data for the selected percus-
sion set

ALL PATTERNS

All data for the user patterns 151–250

Sequencer

MIDI IN

MIDI OUT

TD-12

Sequencer

MIDI OUT

MIDI IN

TD-12

TD-12_e.book 75 ページ 2005年2月18日 金曜日 午後6時39分

Advertising
This manual is related to the following products: